Record

The audio and video recordings and still images can be captured using the Record feature. The camera preview can be used in the settings, with the text, in controllers, in the web server page and on an external screen. The camera features can be controlled from within the Record settings or using a prompter control from any remote or controller. Graphical overlays can be added to the video preview, as well as recorded output.

Access Recording Settings

  1. Show the settings.
  2. Select the Record menu.

Enable Recording

  1. Set the Recording Enabled switch to the ON position to turn on the recording features.
  2. Set the Recording Enabled switch to OFF when not using the recording feature to save battery life.

Record Video

  1. Choose the Video option as the source.
  2. Choose either the Front camera or the Back camera.
  3. Choose a video preset. The available presets are determined by the type of camera being used. The options will vary between cameras and devices.
  4. Press the Record button to start recording.
  5. Press the Stop button to finished the recording.
  6. The recording can be found in the Recordings list.

Still Image

  1. Press the Still Image button in the Record settings, or use the Still Image prompter control from a controller or remote.
  2. The image can be found in the Recordings list.

Record Audio

  1. Choose the Audio option as the source.
  2. Press the Record button to start recording.
  3. Press the Stop button to stop recording.
  4. The recording can be found in the Recordings list.

Torch/LED

Press the Torch button (flashlight) to turn on/off the back camera's torch. The result is the same regardless of the selected camera.

Camera

  1. Select Front to use the front camera.
  2. Select Back to use the front camera.
Note: The available video presets will change when the camera is changed.

Video Preset

  1. Choose the Video Preset option.
  2. Choose from the list of presets for the current camera.
Note: The available video presets will change when the camera is changed.

Exposure

  1. Use the Exposure slider to adjust the camera's exposure if needed.
  2. Use the +/- buttons to incrementally adjust the exposure.
  3. Tap the exposure text to enter a value for the exposure in EV.
  4. Tap on the preview in the settings or the floating preview to automatically adjust the exposure and focus to a specific point.

Zoom

  1. Use the Zoom slider to adjust the zoom of the camera.
  2. use the +/-buttons to incrementally adjust the zoom.

See Also: