Clock

The clock feature can be used as a stopwatch, a timer or a time clock. The clock can be displayed in the settings and the titlebar or floating over the prompter.

• Access Clock Settings
• Enabling/Disabling the Clock
• Change Clock Type
• Controlling the Clock
• Change Clock Location
• Locking CLock Size and Location
• Changing Opacity
• Start On Play, Stop On Pause

Access Clock Settings

1. Show the settings.
2. Select the Prompter menu.
3. Select the Clock option.

Enabling/Disabling the Clock

1. To enable the clock feature, set the Enable switch to the ON position.
2. To disable the clock feature, set the Enable switch to the OFF position.

• The clock, clock controls and clock settings will be displayed when the clock is enabled.

Change Clock Type

1. For the Type option, select Time to display the current time.
2. Select Stopwatch to use the stopwatch feature.
3. Select Timer to use the timer feature.

Controlling the Clock

• For the Stopwatch feature:
  

1. Press the Start button to start the stopwatch.
2. Press the Split button to split the current running time. The split times will be displayed in a section below the clock settings.
3. Press the Stop button to stop the stopwatch.
4. Press the Reset button to reset the stopwatch.

• For the Timer feature:

1. Enter a time for the timer using the Duration setting.
2. Press the Start button to start the timer.
3. Press the Pause button to pause the timer.
4. Press the Resume button to resume the timer.
5. Press the Done button to reset the timer.

The Clock feature can also be viewed and controlled by Remote Controls, the Controller Bars, the Controller Menu and the 3D/Long Touch Menu.

Change Clock Location

1. Select the location for the clock with the Location setting.

• None: The clock will not be displayed anywhere. It can still appear in controllers and remotes.
• Floating: The clock will appear in a floating window that can be moved and resized.
• Titlebar: The clock will appear in the titlebar near the edit button.

Locking Clock Size and Location

1. To allow the floating clock to be moved and scaled with pinches, set the Movable switch to the ON position.
2. To prevent the floating clock from interacting with touches, set the Movable switch to the OFF position.

Changing Opacity

1. Adjust the clock opacity using the Opacity slider.
2. Incrementally adjust the opacity using the +/- buttons.

Start On Play, Stop On Pause

1. Enable Start On Play option to automatically start the clock feature when scrolling beings.
2. Enable the Stop On Pause option to automatically stop the clock feature when scrolling is paused.