AirTurn

AirTurn remotes can be purchased at AirTurn.

Access AirTurn Settings

  1. Press the Settings button.
  2. Select the Remotes menu.
  3. Select the AirTurn option.

Connecting AirTurn Devices

  1. Turn on your AirTurn device.
  2. Following the instructions that came with the AirTurn device, select the correct mode for use with iOS.
  3. Press the Connection button.
  4. Enable the AirTurn Support switch
  5. Follow the directions in the AirTurn connection settings connect a device.

Test AirTurn Device

  1. From the AirTurn Connection menu, press the info (i) button.
  2. Use a control on the AirTurn device. The cooresponding number for the port will appear in blue. If this is not the case, it is possible that the AirTurn device is in the incorrect mode or not connected.

Configure AirTurn Device

  1. From the AirTurn menu, press the device type button to display a list of AirTurn devices. Or use the next and previous buttons to navigate through the devices. It is also possible to display the AirTurn controls as a list of ports.
  2. Using a control on the AirTurn device will illuminate the control on the graphic.
  3. Tap a control on the graphic to assign a prompter control.
  4. Choose a control from the list of available prompter controls. Repeat this step to assign controls to all AirTurn remote controls.
  5. For prompter controls that can use a value, an additional value button will appear for the control. Tap this button to add or remove a value for the control.

Changing Presets

  1. Use the Next Preset button to go to the next preset in the list.
  2. Use the Previous Preset button to go to the next preset in the list.
  3. Use the Preset button to display the list of Air Turn presets.

Using Single/Double Presses

Prompter controls can be assigned to single presses and double presses for AirTurn controls, allowing twice the number of controls to be used. In order to assign controls to double presses the Enable Double Press option must be enabled in the AirTurn Options and the Advanced Features option must be enabled.

  1. Select the • presses option to display the single press controls.
  2. Follow the steps outlined above to configure the single press controls.
  3. Select the •• presses option to display the double press controls.
  4. Repeat the process of assigning prompter controls to the AirTurn controls.

See Also